Home

Newcastle’s And Gateshead’s Best Flat Roofing Directory

 

Here at Ace Roofs we have spent a lot of time gathering infomation about the many different Flat Roofing compaines that are spread out in the North East, Tyne & Wear area especially in  the Newcastle And Gateshead area and which were the best to hire  After speaking to many customers and roofing companies we have found the most reliable company around is RubberRoofs. We spoke to them and they offered some great advice how to deal with flat roofs.

Read on to learn how to best maintain your  roofs .

Flat roofs generally don’t shed water as quickly. It is the reason why it is more important to protect from leaks.

Here are 7 tips for protecting your flat roof from leaks from best flat roofer Gateshead:

1. Regular Inspections

It is important to ensure that your flat roof is inspected every few months. Depending on your home’s architectural style, you can inspect a flat roof by looking out a second-story window. In other instances, you will have to climb a ladder to access the roof.

Check for pitting and rust on your metal roof or loose seams, blisters, tears, and holes if you have asphalt-roll roof. Add patches or make appropriate repairs to prevent leaks. It is also important to check the edges of the flashing to ensure that water does not seep under it.

2. Use Protective Paint

To protect your asphalt-roll roof against the sun’s damaging ultraviolet rays, you should use reflective asphalt aluminum paint to cover it. The paint also provides lubrication for the roofing and reseals the surface against water.

3. Reviving the Roof’s Surface

Asphalt roof become a patchwork of repairs after some time. If this is the case for your roof, you can revive its surface by brushing on an asphalt roof coating. It your roof has a slope of any sort, start at its highest point working way down.

4. Fixing Leaks

If your felt-and-tar roof starts leaking, scrape to remove the gravel and then apply a fresh coat of roof tar. Ensure that the gravel is replaced before the hardening of the tar. If you are unable to identify the source of the leak, use tar to cover the entire suspected area.

5. Fixing Blisters

In case you discover blisters on your asphalt roll roof, trapped moisture is usually the culprit.

Use a utility knife to split the blister down the middle thus releasing the moisture. Allow the blister to dry, then fill its cavity using roofing cement squeezed in using a caulking gun. Drive roofing nails on both sides of the split, and then apply roofing cement to the nail heads and slit.

Cut a patch of the same roofing material a few inches wider and longer than the damaged area. Fix the patch over the repaired area using nails and then use roofing cement to seal the edges of the patch as well as the nail heads.

6. Leaks in Aluminum Roofs

If you have fiberglass mesh, it becomes easier to fix leaks in an aluminum roof. Cut 2 pieces of mesh, each of them large enough to cover the damaged area generously. Use a wire brush to clean the area and then coat it with roofing cement.

Apply a piece of fiberglass over the fresh cement and then cover it with more cement. Next, position the second piece over the cement and cover that piece too with a final cement coat.

7. Use Reflective Roofing

You should consider using a reflective roof product when you are re-roofing a flat roof particularly if you live in a warm climate. Products such as these help lower roof surface temperatures by as much as 100°F (38°C), in turn reducing your cooling bills by as much as 50 percent.